|
|
|||||||
| Register | Donate | Events Calendar | Picture Albums |
| For-Sale Adverts Steam items and equipment For Sale. |
 |
|
|
Thread Tools | Display Modes |
14th July 2009, 02:14 PM
|
||||
|
||||
Water Tenders
I have a couple of old water tenders that would suit a roller or tractor etc.
In need of restoration but a good basis to start and would really look the part as they are old and on cast wheels with steel frame (one is part wood) and a steel galvanised tank. A big old tap is situated at the rear to enable buckets to be filled or showers taken !!! The size of the tank is approximately 30 inches X 54 inches and using the following formula = diameter and the height of the cylindrical tank in inches 3.14xDxDxH/6912 x 7.5I guestimate the capacity at 165 gallons or 750 litres. Asking 250-00 each and planning to visit Somerset Steam do at Low Ham so can deliver them to site. Will upload some photos later (after I have worked out how to) or pm an email address and I will forward on. 
|
|
14th July 2009, 03:20 PM
|
||||
|
||||
|
Hopefully this will work and there should be a picture of one of the bowsers
If not apologies and back to the drawing board !!
|
|
14th July 2009, 03:40 PM
|
||||
|
||||
|
Okey dokey hopefully this should work as followed the instructions to the T.
|
|
15th July 2009, 01:43 PM
|
||||
|
||||
|
Picture of the other water tender.
|
|
15th July 2009, 07:34 PM
|
||||
|
||||
|
Thanks for the interest shown in the bowsers; the one with the wooden/metal frame is now sold.
|
|
|
|
Linear Mode
