simpling valve

[hercules1912]

Does anyone have a simpling valve suitable for a 1904 compound slide valve Aveling roller please?

PM or email lee.chadderton@hotmail.co.uk

Many thanks, Lee.

[avelingporter]

overhead valves or side valves?

[hercules1912]

Ah yes, sorry, side valves mate.

[The Pirate]

James Cummins - Universal Steam Engineering would be able to supply a new one.

[avelingporter]

Shame, coz I have a spare ohsv one, but would rather have as a spare, but willing to help out if required.

[8_10 Brass Cleaner]

why not simply use a 1/2 BSP 1/4 turn azy packed plug cock?.

As far as I was aware thats essentially what yours is on 'The Pirate' Tryst, only later did they fit the push button type.

One with screwed fittings like this



£18.40 plus some very awfull tax at HSS, probably with you the following day too.

Just need to make the pipework, and a handle and rod then your good to go

[hercules1912]

Many thanks, never thought of that, cheers.

[Aveling8727]

Could you make one out of a whistle valve and use it as a push button? I've never been a fan of the Aveling type 1/4 turn simpling valves and would like to change mine when it is restored.

[8_10 Brass Cleaner]

Originally Posted by Aveling8727

Could you make one out of a whistle valve and use it as a push button? I've never been a fan of the Aveling type 1/4 turn simpling valves and would like to change mine when it is restored.

You need a decent size valve to get the volume of steam through. The one on the Marshall is of that design, but about the size of a 1inch BSP whistle valve.

When I get to drive Mr Milns GTI roller, I quite like the 1/4 turn cock, if you set them so the handle down is shut you can get it to open with a flick of the wrist, and it will close itself with the weight of the handle.

Also, a side valve Aveling is like the Marshall in that its not live steam, whearas the Burrell you are used to is.