Brass Gong

[Dunrolling]

Have got one coming in from the States next week.

[ethel]

If anyone is going to have bits cast or make up a bell then I would also be interested in having one.

[8_10 Brass Cleaner]

Originally Posted by Dunrolling

Have got one coming in from the States next week.

Therses a few of those about. Very like the Aveling ones but the bell seems bigger.

[8_10 Brass Cleaner]

Dan.

He says he doesnt like the shape of your bell.....!.....

He is a pain in the arse

[Ransomes AM54]

Originally Posted by 8_10 Brass Cleaner

Dan.

He says he doesnt like the shape of your bell.....!.....

He is a pain in the arse

A square one might be hard to find.

[8_10 Brass Cleaner]

Right

Here is the guts of my bell



In my opinion 95% of the components are simply made out of sheet material. Mine is brass, but I would suggest water cut stainless (or steel) a better option. The rest is lathe work and drilling holes. Leaving the problem of the bulbous striker.

I have drawn round the internal components of my bell. And am happy to fire a 1:1 scan of these templates to anyone who wants one via e-mail (for free). Chris is having a copy already. You will have to live with my humour on the sheet, and mixed imperial and metricated dims.

I have agreed to convert my bell section into a pattern to take to my tame foundry to cast Chris one in Brass (assuming this can be done without butchering it).

I am also happy to take orders for more 'bells'. These will cost more or less whatever it costs me to get them done. I can't give a price presently, but my foundry is not in the business of ripping people off.

Any interest in some bell castings?, plus the templates? you can then make your own bell.

[Lancashire Lad]

Hedd, are you just getting the Bell cast or all the hammer, thrower, lever and backing plate as well? If not, I can offer all these components as I have patterns for them, seeing as your is all assembled.

I'll stick to my dog bowl style bell though thank you Hedd.

Just to note, I think there is a copy of the signalling gong mechanism drawing in one of Gilberts books...

[8_10 Brass Cleaner]

Originally Posted by Lancashire Lad

Hedd, are you just getting the Bell cast or all the hammer, thrower, lever and backing plate as well? If not, I can offer all these components as I have patterns for them, seeing as your is all assembled.

I'll stick to my dog bowl style bell though thank you Hedd.

Just to note, I think there is a copy of the signalling gong mechanism drawing in one of Gilberts books...

No just going to do the bell. it is 126mm OD diameter if that helps to confirm if your guts would suit.

I do not want to dismantle mine, but I see no reason to, everything is simply made out of flat stock except the striker, and I could carve one of them out of solid with an angle grinder if I had too, so have no doubt Chris could.