brass screws - Traction-Talk

CL engineering · #1 Post / In Thread 7th September 2016, 02:46 PM

Hi
l am try to get 6off ,1/4 bsw dome headed brass screws about 1.25" long
happy to pay but can not find any one that can help in less I buy 100's
thanks
Chris

buggeroff · #2 Post / In Thread 7th September 2016, 02:55 PM

You can get them from BAPP bolts in Barnsley.

CL engineering · #3 Post / In Thread 7th September 2016, 03:01 PM

Quote:

Originally Posted by buggeroff

You can get them from BAPP bolts in Barnsley.

Thank you for the info just rang them and they said they can not help with brass and ww!
Chris

Broken Firebar · #4 Post / In Thread 7th September 2016, 03:37 PM

I might have a few left over Chris. I'll have a look.

weidner · #5 Post / In Thread 7th September 2016, 04:06 PM

I have loads of 5/16" ?

CL engineering · #6 Post / In Thread 8th September 2016, 03:28 PM

Quote:

Originally Posted by weidner

I have loads of 5/16" ?

thanks for the offer but need 1/4"

thanks Chris

Burrell242601 · #7 Post / In Thread 8th September 2016, 04:54 PM

Some on eBay with hex head you could always turn them down and cut a slot

Sent from my iPhone using Tapatalk

Broken Firebar · #8 Post / In Thread 8th September 2016, 06:19 PM

Hi Chris

I've only got steel ones I'm afraid.

Cheers

Tony

woodypup59 · #9 Post / In Thread 8th September 2016, 06:27 PM

Try Leyton Fasteners, 0151 355 8045

sales@leytonfasteners.co,.uk

Colin Dix · #10 Post / In Thread 9th September 2016, 06:41 AM

I made some using large brass screws, turn the diameter to the correct size, then start a die over the screw end in the lathe and then one the die is cutting straight. remove from the chuck and grip the wood screw end in a vice and wind the die on until you have enough thread. Cut of the old wood screw bit and trim to length. It works well.

cheers,

Colin