fowler parts

[hedge]

hi all i have a selection of fowler parts which i no longer require and are as follows.

1x LP cylinder end cap 7 stud, external dia 15 1/4", bore dia 10 3/4" later style with stud in centre for traditional fowler cover good condition no cracks or damage just needs a clean. fits compound R & A class engines. original gasket is included at no extra cost £100


1x blast pipe end inlet bore 3 1/2", outlet bore 1 1/2" approx and the bolt holes are 6 1/4" centre's. good condition just requires a scrub and a re paint. £150


1x blast pipe centre piece 3 3/4" bore. 5 7/8" hole centre's at oval end and 5 1/4" centre's on triangular end. £150


PLEASE NOTE THE 2 BLAST PIPE CASTINGS ARE NOT A MATCHING PAIR!

1x RH crank shaft bearing cap including selector fork, casting No 23362A in good condition selector fork is seized as is the oil cap lid other wise really good condition. engine No 11721 is stamped on the item which is an A4 compound convertible so will fit similar engines. £250


2x steers man/foot plate step 6" wide 3 1/4" tall 16" long (longest section) 13" long (shortest section) original casting has some damage but is still usable, new casting in perfect condition.
1x new casting £100

1x old casting £50

demo pic (below)


1x rear wheel retaining collar internal dia 6 3/4", external dia 10 1/2", securing pin hole dia 1 1/2" i don't know what engine this is from but some thing big! £30


2x cross head's 2 1/2" wide inside the feet, 6" tall between bronze slipper faces. both in brilliant condition with no cracks or repairs, slippers are in good usable condition every thing in the pictures included. the original brasses are included in the price with the exception of the little end adjustment wedges as these are on 8669. £300


if any extra information or dimensions are required PM me on here and i will get back to you asap or call/text me on 07533067157. items are cash on collection or cheque, funds must be fully cleared before any items leave. postage can be arranged at buyer's expense or buyer can arrange collection after funds are cleared.

all items located in Wiltshire sn15 post code

thanks for looking

regards sam

[hedge]

blast pipe end is now sold

[hedge]

cross heads now sold!!!

[hedge]

bump

[hedge]

bump again

[hedge]

still have some items left waiting for a good home

LP cylinder end cap £100
right hand crank bearing cap with gear fork £250
1x new & 1x original foot plate steersman step (£100 new) & (£50 original)
exhaust mid section £150

please feel free to give me a call on 07533067157 or PM on here

cheers sam

[hedge]

exhaust mid section sold


original foot plate step sold


cheers sam

[hedge]

fowler A4 bearing right hand side crank shaft bearing cap and gear selector fork, casting number 23362A in good condition selector fork is seized as is the oil cap lid other wise really good condition. removed from fowler No 11721 which is stamped on the item which is an A4 compound convertible so will fit similar engines. £250

cap dimensions are:
whole centre's 7 3/8"
width 4 1/4"
length of bearing slot 5 3/4"




cheers sam

[hedge]

bumping this back to the top and revising list of parts for sale.

sprung fowler third shaft inboard gear and coupling ring don't know what class of engine it came from but will fit on 8669's third shaft hub so most likely A and R class engines around 1900 - 1910 before moving to the oil bath set up. coupling ring is in good condition with all bar one bronze slipper present. the gear/hub casting is probably only good for use as a pattern to either cast or fabricate a replacement gear. the two parts are seized together but the bronze show signs of very minimal use.

gear/hub dimensions:
7 3/4" dia bore in bronze centre bushing.
33" dia across the tip of the gear teeth.
29 7/8" dia in the root of the gear teeth.
3" wide teeth not including backing piece.
4 1/4" maximum overall width.
44 teeth

coupling ring dimensions:
2' 1/4" overall ring dia.
3 3/4" maximum overall width.
3 3/8" across the bronze slippers.

£250



fowler foot plate steers man step new casting.

£100



fowler A4 bearing right hand side crank shaft bearing cap and gear selector fork, casting number 23362A in good condition selector fork is seized as is the oil cap lid other wise really good condition. removed from fowler No 11721 which is stamped on the item which is an A4 compound convertible so will fit similar engines. £250

cap dimensions are:
whole centre's 7 3/8"
width 4 1/4"
length of bearing slot 5 3/4"

£250



please feel free to ask for more pics or information either on here or call me on 07533067157 if i miss your call i will call back asap thanks for looking.

regards sam