Wanted scammell gearbox mounts and other bits brake linings

[stressed myke]

This is what we done.

I cut the centres out of 3 385/65/22.5 wheels, then had new centres, spacers and stiffeners laser cut and welded in. Then powder coated.

I’m running Bridgestone 385/65/22.5 tyres as these are close in tread pattern and size to the original 14.00x16”

[Lord B of Crafton]

Robert

Ive machined soft nylon from solid and bonded it in the original mounts before now. Trouble is even if you found an old part chances are the rubber will have gone hard and will fail very quickly.

Dave