Exhaust silencer

[weidner]

Originally Posted by martin hunt

Just had email back from suppliers of the Morris minor exhaust system and their pipe is 35 mm bore
I've room in the manifold mounting flange to machine a suitable hole for this to fit into
There is enough pipe work to be able to make up,a functioningsystem ,with a little bit of modifying
Will the slightly larger pipe work cause any problems?
Looking at the manifold flange more closely it appears that the 32 mm pipe now in situ has been flared out before being welded in place
So perhaps 35 mm was the original size fitted ?
Cheers Martin

The standard Morris 1000 exhaust system used to have a nice crisp fart on the overrun .

You have been warned !