|
|
|||||||
| Register | Donate | Events Calendar | Picture Albums | Mark Forums Read |
| Wanted Adverts Steam items and equipment Wanted. |
 |
|
|
Thread Tools | Display Modes |
|
|
24th April 2016, 05:27 PM
|
||||
|
||||
Thanks for that
I can't Rob you of those two then? The nipples screw into a 1\4 BSP hole in chassis Seen some on bearing man site not to modern looking Cheers martin
__________________
vectis squire Today is the tomorrow you worried about yesterday!! 
|
|
24th April 2016, 05:53 PM
|
|||
|
|||
|
The same type of grease nipples as your original ones with 7/8" thread for the grease gun are used on Garrett wagons as well. If you manage to find a source of new ones please let me know.
|
|
24th April 2016, 06:01 PM
|
||||
|
||||
|
The Hex slide on type were available in Brass but a hard to find now, I fitted my Carrimore with a full set, the original Carrimore fitting was the same type but with a larger hex that I could not get a fitting for. The brass hex type may be available from an ex Mod engineering supplier. Try Colin Blackwell at BB Engineering Supplies 07976 539675 or McGowan Engineering 01527 893358
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
