Wanted 3/8 whitworth round head brass screws

[81119]

Wanted approx 20 brass round head 3/8 whitworth screws, still have a couple of local places to try but if anybody has some to part with let me know, maybe be looking for some 5/16 ones also depending on what arrives in the post this week , need to be minimum of 1/2" long.

Many thanks

Mark Fellows

[notyalc]

If you can get the right shape head, why not use UNC, only you will ever know.....

[weidner]

I could do with some 5/16 ones . They are used to hold the cladding plates onto Fowler cylinders .

[windmiller78]

Originally Posted by weidner

I could do with some 5/16 ones . They are used to hold the cladding plates onto Fowler cylinders .

bob i've some small dome head black ones you can have 1/2 "long

[8_10 Brass Cleaner]

The last lot i had came from Arrow engineering supplies down next to the tip at Rugby. Between it and the railway yard

[YA1177]

The Arrow supply company in Bedford is now called Montrose, I don't know if they have all changed name ?

[81119]

So has anybody got any they want to part with ...... ??

[81119]

I have tracked some down and am no longer in need.

Anybody else looking for some try Surplus Supplies at Newark, www.polished-stainless.com and try the 'everything else' section of the webiste, he did say not everything he has is on the website so it might be worth emailing or phone as he may have what you are looking for.

Tel 01636 636735