Traction-Talk - Sprung trailer for sale

For sale an early trailer restored using oak and ash with the exception of the front and rear head boards they are 1” plywood routed to look like planking (they are removable on oak posts ) . There is a big steel box section beam running from the back to front bolted to the floor boards and main beams also the turn table pin goes through this .

The brake linkage is all there and attached but no brake blocks fitted nor winding handle.
There are a pair of rubber tyers the right size that are available with the trailer (marked in red on first photo ) as the fronts could ideally do with being replaced .

The A frame has a slight bend in it but would straighten with some heat .

Not sure of a year but I would say around ww1 ?

The axel hub caps were broken so we have had 4 new cast in alloy and have been machined to take 4 brass screw caps enabling oiling of the wheel bearings

The dimensions are as follows

Length (excluding a frame) 11ft 6”

Width 6ft

Height (to load floor) 3ft 11”

Offers are invited please private message myself to obtain a contact number and we can have a chat .

Kindest regards Tony Ready