Naerok SSB-160A Metal Turning Lathe On Stand
 

Naerok SSB-160A gap bed metal turning lathe
Runs on 240v single phase power.
Supplied on original stand
The lathe features the following:
Gap bed, screw cutting gearbox. Power long feed, Power cross feed, Thread dial indicator, Imperial and metric dial graduations, Cam lock chuck fittings, Coolant tank with working pump, 4-way tool post.
The lathe is a long bed lathe with 34” between centres. The center height is 6” and 9” with the gap bed removed.
It is supplied with the following:
3 jaw chuck, 4 jaw chuck but this will need a back plate (about £50 and freely available), Selection of centres, Tailstock drill chuck, fixed steady.
Viewing welcome.
Please note you are collecting from WS7 Burntwood
£1500 Please see the link below
https://www.whitsales.co.uk/naerok-s...th-accessories