Traction-Talk - Myford Super 7

Myford Super 7
3 ½” x 19” Imperial Lathe (Ser No SK 75168)
All original on factory cabinet stand (20/039) with factory fitted Stop/Start contactor and Reversing drum switch, single phase ½ HP motor Ser No M1137 fitted with Standard universal tool clamp and thread dial indicator (1419), including large stainless steel rear splash guard, RS machinist angle poise lamp and long cable with 13A plug. Good condition for year, complete with original manual, brochures and receipt (14 December 1967).
The lathe was originally a university machine that only had very light use. It then brought by my father who has hardly used it and looked after it very well.

Including the following accessories:-
Change gears: 70, 55, 45, 40, 38, 35, 20, (20, 25, 30, 50, 60, 75 fitted on machine).
4” 3 Jaw Chuck Inc matching external jaws & 2 chuck keys. 6” 4 Jaw Chuck & 2 chuck keys.
7” Face Plate. 4 ½” Driving Plate. MA85 Lathe Carrier 1”. Arbor for Milling Cutters (1133).
Lever Operated Collets chuck (20/65). Set of Crawford Metric Collets: 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9 & 10.
Jacobs 3 Jaw Drill Chuck 0 - ½” No2 Morse taper. Morse reducer sleeve 1 – 2.
4 x Centres No 2 Morse taper. Hollow Centre (E155). 2 x Travelling Steady (1413).
Vertical Slide Swivelling Type (MA68/1). Spare Cross Slide and Custom built tool holder.
2 x Universal tool clamps.
2 x Rear tool post (1468).
Slurry Tap & Tube. 2 x Oil Guns.
Chuck Safety Guard.
Large quantity of used cutting tools & boring bars.

£2000 ono.

Located nr Romsey. Hants.

Please call Tom on 07791355009

I'll add photos as soon as i can.