Traction-Talk - 4" mclaren bronzes.

Traction-Talk (https://www.tractiontalkforum.com/index.php)

- Wanted Adverts (https://www.tractiontalkforum.com/forumdisplay.php?f=11)

- - 4" mclaren bronzes. (https://www.tractiontalkforum.com/showthread.php?t=36658)

Chaosengineering

7th November 2015 09:20 PM

4" mclaren bronzes.

I'm after any of the bronze / brass castings suitable for a 4" mclaren build. Not any of the bearings, but pump, clacks etc etc. rather than going straight to HPM if someone has a surplus.
Cheers

Sent from my iPhone using Tapatalk

4040	7th November 2015 09:27 PM

I have a spare casting for the steam pipes at the rear of the boiler (an elbow type thing where the blower tap goes) if i can find it!

Chaosengineering

8th November 2015 10:30 AM

Thanks adrian

Sent from my iPhone using Tapatalk

4040	8th November 2015 05:01 PM

Found it, it's this one

http://www.steamscenes.org.uk/tti/14/015_0495.jpg

Chaosengineering

8th November 2015 07:25 PM

Ideal, thanks. Do you want to Pm me a contact for you at some stage.
Cheers Marcus.

Sent from my iPhone using Tapatalk

4040	8th November 2015 10:13 PM

Yea, no prob

Chaosengineering

16th November 2015 06:01 PM

Just bumping up again. Any more surplus castings out there?

Sent from my iPhone using Tapatalk

staffordshirechina

16th November 2015 06:16 PM

Sorry Marcus, I used all the ones I bought.

All times are GMT. The time now is 08:20 PM.