Traction-Talk - Large Broadbent Lathe for sale and Triumph 2000

I have no longer any use for my big Broadbent Lathe.
I am moving out of the workshop where it has been for the last 9 years and it needs to be moved very soon.
It all works and has little wear but it is going rusty and will need a good clean and oil up before use.
It will swing around 3ft in the gap and pass around 3" through the spindle.
It has 3 jaw and 4 jaw chucks and the faceplate.
Also has some large turning & boring tools.
It must go and will go to scrap if nobody wants it, it's not about getting loads of money for it but getting it to a home where it will be used as it's far too good to scrap - old machines never die they just need some tlc.
It is Evesham Worcestershire
When collecting it will need to be a weekend and the lorry will need a crane to lift it - around 3 tonne.
I also have a Triumph 2000 long bed lated with hydraulic copy attachment, 3 & 4 jaw chucks, quick change tool post, but again is showing signs of being stored in a corrugated iron barn.
There are also 2 old drilling machines and a 4 post car ramp.
All must be gone in the next 2 weeks or if committed I may be able to extend time by negotiation with the landlord.
Please email me for more info r.j.lewis5956@gmail.com or text on 07720557182 after 5 weekdays or any time weekends.
Thanks for looking.
Rob.