Fowler T3 Water lifter Nut
 

Before I get one made

Has anyone got a 'nut' for the water lifter on a Fowler T3?

It seems to be 2 1/4 BSF (yes really), which is 6TPI

The ID of the thread in the nut should therefore be something like 2.143inches (54.43mm).

Pitch is 0.16667 (4.23mm), whit form.

This is a much smaller lifter than the lifters fitted to other larger Fowlers, pic attached to assist.

https://fbcdn-sphotos-g-a.akamaihd.n...fbddfb6f4afab8

PM, hedd_jones@yahoo.co.uk or 07871 577 132 please