Fowler whistle & clack valve
 

Small Fowler type bell whistle

This Fowler bell whistle was purchased from the late Roy Wakefield in 2006 but has never been fitted or tried since, as the original whistle was then located for engine it was intended for.

The whistle is 10” overall height / 3” in diameter / with a ¾” BSP fitting. There are do dents or damage, it is complete, original, shows signs of having been on an engine and used, would suit most engines up to Road Loco and K7 size. Roy didn’t say which actual engine it came from and I have never tried it to hear the tone however when the bell is flicked it gives a high clear ring.


Original Fowler Boiler Feed Clack Valve / Fowler part number Z4460A

Original ¾” / 1” Fowler clack valve in excellent original condition, complete with poppet valve and taper plug cock isolation valve built in. Designed for fitment to the horn plate or flat pad on the boiler barrel with a 3 stud boiler mounting of 3 3/8” PCD over a bronze olive (olive not included) All the sealing faces are in excellent condition including the inlet flange which has four bolt holes with a 2 7/8” PCD. This valve has been used but is good condition.

If you are interested or require further information please call 01629 821950 9am to 5pm or email guy@israelnewton.co.uk

The whistle has now sold

The clack has now sold