Steam Spares for sale
 

Roger has asked that I put these on here for him as he is not very good with 'puters!! (they are not steam driven!!!)

Here we have a collection of parts that were surplus after the rebuild of A&P 4765. He is having a new year's clear out and thought you should be first to have these offered to you before going on fleabay!

Please ring Roger Pimm, they are his bits now, on 07860 526617 or leave a messgae (He is a bit rubbish at answering so leave a message if he does not answer).

Located near Southampton. Postage possible, charged at cost.

Cheers.

Douglas



Penberthy Injector, model AA21, low pressue 1/2" size, missing steam cone. £125 ono

http://www.tractiontalkforum.com/pic...ictureid=15190
http://www.tractiontalkforum.com/pic...ictureid=15191

Penberthy Valve Body, No vlave, marked with '200', 3" length. £20

http://www.tractiontalkforum.com/pic...ictureid=15189

Water Valve, working, inc handle. £20

http://www.tractiontalkforum.com/pic...ictureid=15185

Mechanical Lubricator, manzell style, marked 'DN 701R' on plate. £145 ono

http://www.tractiontalkforum.com/pic...ictureid=15187

A&P Style Oil Resevoir lids, brass castings for finishing, approx 2"x 2 3/4", 2 off. £10 each

http://www.tractiontalkforum.com/pic...ictureid=15188

A&P Safety Valve Tops, 2 off, plus 1x column. £offers

http://www.tractiontalkforum.com/pic...ictureid=15193

Man Hole Door, curved to fit in barrell, hole size 6 3/4" x 5", £20
Mud Hole Door, flat, 4" x 2 3/4", £10

http://www.tractiontalkforum.com/pic...ictureid=15186

Pump Rod, probably A&P, 1 5/8" dia, 12" length, pitted at lower end, £offers
A&P pump top fresh casting, 4 3/4" dia, £20
Lever Guide, probably A&P, 8 3/4" length, 3 1/8" bolt centres, £offers

http://www.tractiontalkforum.com/pic...ictureid=15192

Water & Injector control rods, probably A&P, one 36" length, one 34" length. £offers

http://www.tractiontalkforum.com/pic...ictureid=15195

Steam Controls Rods, probably A&P, both 19" length. £offers

http://www.tractiontalkforum.com/pic...ictureid=15194

Update....

Lubricator, injector, both valves, all the control rods and the oil pot lids have now gone.

Still available are the safety valve bits, the man and mud hole doors and the pump rod, lever guide and the pump top.

Cheers.

Douglas