Quote:
Originally Posted by 8_10 Brass Cleaner
Dave
The gent who is in the shed next to me at the engines living quarters has a 6ton Piston Valve Aveling.
He had pump issues so had a typical aveling clack made up with an extra large flange to mount on the 4 studs used as pump mounts. Looks splendid.
The other think I have seen done, is an injector feed into the pump body, using the clacks already part of the pump casting. Obviously depends where your cracks/issues are in the casting assuming you have one.
|
Thanks Hedd, I have refurbed the pump quite extensively, but knowing what a poor reputation they have, and considering the jiggling about I am going to have to do now to correct alignment, I had got to thinking that a second injector may be the way forward. I have not drilled the holes for the pump yet so I could go down this route reasonably easily. I suspect that my pump would make money-wise what a clack would cost me from HSS.
Dave