Half size Burrell boiler/castings/parts
This is a mixed collection of half size traction engine parts.
The plan was to build a single cylinder Burrell.
The boiler is a brand new TRS built boiler, 14" diameter barrel built to run at 200psi. It has a CE mark and all the relavent paperwork. The rear wheel rims are 32" Dia by 8" wide, flame cuts hubs and spokes 34 in number. There are also 16 front wheel spokes.These have been stored for some years and could do with grit blasting. The castings are as shown, including a 24" flywheel, cylinder block, covers, motion bracket, main bearing, eccentirc straps, slide bars, crosshead. There is a wire cut expansion link and die block, pair of EN36 lifting links and CNC machined eccentric rods. There is also a welded EN8 crank shaft with turning spigots on it (not shown) and a set of Lincolnshire steam half size SCC drawings. The idea was to use the drawings for the tender, wheels front end etc, this boiler is larger diameter than the cylinder is designed for but it could all be machined to fit.
The reason for selling is too many projects and not enough time! Collection is the best way but we have a fork lift and could load on to a pallet.
I am selling this through E Bay, many photos No:300600464771
Any questions call me on 07530313714
|