Workshop clearout

[4inchgarret]

Having a good clearout, and the items below must go.
Vintage pulley block, Herber Morris 1 ton worm and wormwheel block, dirty but OK underneath. Offers
EIS model 50 or 501, 110v electric hoist, 250/500KG capacity, at least 25M chain on it, it works too. Offers
3 hydraulic motors, 1” output shafts, more info available if interested. Offers
Machined Acme thread lead screws they have 15” of 1 1/8” plain, then 15” of acme thread. 1” dia, 5TPI, then 3” of plain section, .780 diameter, 2 off LH, 2 off RH, all with long round bronze nuts. £50 for all four
50 Int tooling, face mills, collet chucks etc, more info if interested, cheap as chips.
Kango 110v hammer drill Model 426, in steel case, tested, and working, with 6 12mm bits and 1 x 16mm bit, all could do with a sharpen, but lots tip left, plus 110v transformer, with 2 outlets. £50.
I can provide pictures and can ship most items at cost or you can collect.
Chris Gunn