Exhaust silencer
 

For my Wolseley wasp
Exhaust silencer
1&1/4" or 32 mm inlet and outlet pipe
5" body diameter ,or there abouts
24 " long ,an inch or two either way isn't critical

Any ideas or leads for supplier would be most welcome
Thanks in advance
Cheers Martin

Just a thought , do you have a custom exhaust maker near by? Have had a few items done for agrucultural products over the years, more than likey somewhere 'boy racers" would use!.

Got a local firm on stand by to make up exhaust,but am having problems finding silencer with correct input and outlet mountings
1&1/4 " is not much used now
Yes I can used flared couplings at either end but would like to avoid this if possible
Cheers Martin

Does anyone know if the exhaust system fitted to the Morris minor is 1&1/4" or32 mm bore ?
Think I could get enough usable parts from this system if right diameter
Seen complete systems on interweb for around£80
But can't get any info as to tube dimensions
Cheers Martin

Martin

I have catalogues in work which give all the dimensions of available exhaust systems, but I am not in work until Wednesday - if you can wait.

Cheers Carl.

Thanks Carl
That will be great
Cheers Martin

Carl , would you be so kind as to copy to me as well , the Austin is also needing a suitable systym .

By the way , to those interested , it turns out to be a 12/6 with the 15.9 engine option , I thought that it all seemed rather light for a 16 horse car .

Hi Bob
There are thick catalogs with a few hundred pages in each one - not practical to copy.

Once I dig them out I will let you know and you can give me some critical dimensions and I will have a look for anything similar.

Cheers Carl.

In the meantime you could both have a play with - http://www.walkerexhaust.com/catalog...mension-search

However it looks like the smallest in/out pipe size Walker manufacture is 1.5" diameter.

Cheers Carl.

Mm , I see , a case of careful what you wish for . First of all I must get the floor boards out and measure up the available space .