Gauge Glass Protectors and Packed Tap
 

Starting to have a bit of a clear out, got alot of stuff here that is probably much better off in the hands of someone who will make good use of it! Just a few of the more easily advertised items to start with...

6 1/2" New old stock gauge glass protector. £125.00
-1 1/4" ID in round section at bottom
-6.5" tall overall
-5 1/8" tall glass
-Brass 2.75" square
N.B. glass quite a loose fit, could do with tightening up
http://www.tractiontalkforum.com/pic...ictureid=50538
http://www.tractiontalkforum.com/pic...ictureid=50539
http://www.tractiontalkforum.com/pic...ictureid=50540

2 1/4" New old stock gauge glass protector. £125.00
-1 1/4" ID in round section at bottom
-2 1/4" tall overall
-2" tall glass
-Brass 2.75" square
http://www.tractiontalkforum.com/pic...ictureid=50542
http://www.tractiontalkforum.com/pic...ictureid=50543
http://www.tractiontalkforum.com/pic...ictureid=50541


Both above protectors could be adapted to a new height easily by buying different sized glass, available from quite a few places.

Flange mounted bent handle test tap. £30.00
-1.75" between holes on flange
http://www.tractiontalkforum.com/pic...ictureid=50545
http://www.tractiontalkforum.com/pic...ictureid=50544
http://www.tractiontalkforum.com/pic...ictureid=50546



Open to offers on all above. All can be posted. Message me for more details.
Plenty more to be posted in coming weeks.

Thanks,
George

Also for sale:

4" Pressure Gauge 0-60psi. £30.00 ono
A really tidy gauge, hardly a mark or dent in it. Just wants a good clean really.
http://www.tractiontalkforum.com/pic...ictureid=50550
http://www.tractiontalkforum.com/pic...ictureid=50549

Tap now sold