60 degree countersink
 

Hi
Anyone know where I can get a 60 degree countersink
The bolts I have for the spokes in the hubs have a shallower angle than usual
Thanks

If you cant get hold of one it might be worth getting a standard counter sink and getting a tool sharpening company to regrind it to the needed angle.


Sent from my iPhone using Tapatalk

Hi Andrew,

nothing special about those, any decent tool shop should be able to sell you one for a fiver :)

Otherwise you can buy them online anywhere, for ex here :

https://www.cutwel.co.uk/hole-making...1-c1136-series

Best
chris

Centre drills have a 60 deg angle.
Brian

Andy, are they imperial screws - bsf, bsw ? If so, the countersink will be 82 degrees, not 60 degrees.

I am not aware of any general purpose screws that have a 60 degree head.

Just a thought.

Cheers Carl.

Countersunk rivets often have a 60 deg countersink.

G and M tools have 60 degree csk on their web site,look up stock no 80206081 They are at Ashingtonwest sussex, Have dealt with them for nearly 30 years